Na jaře se zúčastníme 1. československého kongresu lékařské genetiky, který se bude konat 2.-4. dubna 2025 v Kulturním a kongresovém centru Elektra v lázeňském městě Luhačovice. Tento jedinečný kong...
VíceNavštivte nás na 19. ročníku konference RANK 2025, která se koná 19. a 20. března v hotelu Zlatá Štika v Pardubicích. Konferenci pořádá Česká společnost klinické biochemie při ČLSJEP ve spolupráci s ...
VíceRádi bychom Vás pozvali na 23. Kaprasův den na téma „Klinická genetika“, který se uskuteční ve středu 26. února 2025 v Kongresovém sále Hotelu Olšanka v Praze. Těšíme se na setkání s vámi a na den pln...
VíceThe biological safety cabinet Class II SAVVY is designed for work with agents of biosafety levels I, II and III. It provides product, operator and environment protection.
Savvy is a new generation of the microbiological safety cabinets that inherited all the advantages of the previous model line Neoteric. A set of constructive and layout solutions have drastically improved exploitational characteristics of the new cabinet. Using three fans has caused a drop in the sound noise level below 47 dBA.
LOW NOISE LEVEL 47dBA in operating mode (fans and lighting turned on) in testing laboratory environment.
LOW POWER CONSUMPTION 0.10 kW
ENERGY SAVING EC FANS
LOW HEAT EMMISSION 30 W
EASY AND CONVENIENT AIRFLOW VELOCITY SETTING
The system provides separate inflow and downflow control as well as automatic air balance control. No need of mechanical air balance setting significantly decreases maintenance time when validating, changing filters and performing periodic
verifications.
HIGH MAINTENANCE ACCURACY OF PRESET AIRFLOW VELOCITY with any level of filters clogging or changing ambient conditions (humidity, temperature, pressure)
THE USE OF TOUCHSCREEN made displaying modes more demonstrative, the cabinet control easier and provided the user with more service information.
LARGE WORKING CHAMBER WITH MODEST TOTAL DIMENSIONS
EASY AND SAFE FILTER CHANGING thanks to the layout solution and a new pressure system minimizing the filter damage risk during their installation.
BROAD BASIC CONFIGURATION
UV light is located in the pull-out unit outside the work chamber and does not interfere with the airflow at work.
MAIN CHARACTERISTIC
Air cleanliness class in the working chamber of the cabinet in terms of concentration of airborne particles (aerosols) according to ISO 14644-1, not less than |
5 ISO |
Cabinet class according to ЕN 12469, NSF/ANSI 49 |
II |
Cabinet type according to NSF/ANSI 49 |
A2 |
Class of the installed НЕРА-filters according to EN 1822-1 |
H14 |
Average velocity of the inflow though the work opening, m/s |
0,47±0,03 |
Average downflow velocity in the working chamber, m/s |
0,35+0,01 |
Air recirculation rate in the cabinet, % |
≈70 |
Illuminance level in the working zone, lux, not less than |
2000 |
MAIN PARAMETERS AND DIMENSIONS
Article |
222.090 - 0.9 m 222.120 - 1.2 m 222.150 - 1.5 m 222.180 - 1.8 m |
Dimensions of the cabinet with the stand in assembly (WxDxH), mm |
1000x770x2095 1200х770х2095 1500x770x2095 1800х770х2095 |
Dimensions of the working chamber (WxDxH), mm |
905x610x750 1105х610х750 1405x610x750 1705х610х750 |
Cabinet's power supply parameters: -voltage, V~ -frequency, Hz |
220-240 50 |
Maximum power consumption (without the built-in outlets load), W, not more than |
-/110/142/220* |
Total acceptable load on the built-in outlets, W, not more than |
1000 |
Fan number, pieces |
2/3/3/4 |
Clean air inflow volume, m /h |
656-674 795-817 1008-1036 1210-1245 |
Air outflow volume, m3/h |
273-309 333-378 426-484 510-580 |
Noise level at 1m distance from the cabinet, dB, not more than |
47/47/53/55** |
* The power consumption with newly installed uncontaminated HEPA filters.
**in operating mode (fans and lighting turned on) in testing laboratory environment.
ADDITIONAL OPTIONS
DIMENSION DRAWING 222.120 - 1.2 m