Novinky

  • RANK 2026

    Navštivte nás na jubilejním 20. ročníku odborné konference RANK 2026, která se uskuteční ve dnech 18. a 19. března v Pardubicích v ABC klubu. Konferenci pořádá Česká společnost klinické biochemie při ...

    Více

  • XXXV. Izakovičov memoriál 2025

    S potěšením oznamujeme, že se zúčastníme prestižní konference XXXV. Izakovičov memoriál 2025, která se bude konat 8.–10. října 2025 v Grandhotelu Praha v Tatranské Lomnici na Slovensku. Izakovičov me...

    Více

  • 1.československý kongres lékařské genetiky 2025

    Na jaře se zúčastníme 1. československého kongresu lékařské genetiky, který se bude konat 2.-4. dubna 2025 v Kulturním a kongresovém centru Elektra v lázeňském městě Luhačovice.  Tento jedinečný kong...

    Více
Zobrazit archiv novinek
Hlavní stránka>Produkty>Laboratorní příslušenství>VIS-A-VIS Biosafety Cabinet Class II

VIS-A-VIS Biosafety Cabinet Class II

Zeptejte se

241.120

VIS-A-VIS Biosafety Cabinet Class II typ A2 for work with lab animals

Microbiological safety cabinet class II VIS-A-VIS is designed to work with lab animals.

The design of VIS-A-VIS cabinet allows two operators working opposite one another at the same time.

It provides product, operator and environment protection when working with agents of biosafety levels 1, 2 and 3.

 

MAIN FEATURES

It is equipped with a system of monitoring the operating modes; optical sensors of the front glasses, the UV-unit and the safety closure position; a control panel with LCD touch screen, where operation information of the cabinet is displayed. The audio-visible alarm system is activated upon failure of the safety conditions.

Downward laminar air flow prevents the materials cross contamination in the working zone. The animals’ hair catcher is installed under the table top.

A unique pull out UV-unit is included into the basic configuration.

The cabinet is designed for operation in standing or seating position.

Support stand for operators in standing position (height of the working surface is 1,008 mm) .

 

MAIN CHARACTERISTICS

Air cleanliness class in the working chamber of the cabinet in terms of concentration of airborne particles (aerosols) according to ISO 14644-1-2002, not less than


5 ISO

Cabinet class according to ЕN 12469:2010, NSF/ANSI 49

II

Cabinet type according to NSF/ANSI 49

A2

Class of the installed НЕРА-filters according to EN 1822-1:2010

Н14

Average velocity of the inflow though the work opening, m/s

0,45±0,03

Average downflow velocity in the working chamber, m/s

0,33±0,01

Illuminance level in the working zone, lux, not less than

2000

Air recirculation rate in the cabinet, %

≈50

MAIN PARAMETERS AND DIMENSIONS

Dimensions of the cabinet with the stand in assembly (WxDxH), mm

1506х750х1965

Dimensions of the working chamber (WxDxH), mm

1110x665x687

Mass of the cabinet, kg, not more than

314

Maximum power consumption (without the built-in outlets load), W, not more than

360

Total acceptable load on the built-in outlets, W, not more than

1000

Air volume supplied to the working chamber, m3/h

915

ADDITIONAL OPTIONS

Gas-tap

Vacuum-tap

Electrical sockets

Cabinet’s stand for operating the cabinet while standing

LED lighting

DIMENSION DRAWING


Košík  

Žádné produkty

0,- Kč Celkem

Košík K pokladně

Platební brána

Platební loga